Factory Direct BC6050 Metal Shaping Machine - Top Quality And Precision Guaranteed

BC6050 high quality metal shaping machine

BC6050 Bullhead planer is a general-purpose planing machine, suitable for planing of flat, T-slots, dovetail grooves and other shaped surfaces. The machine has the characteristics of good rigidity, high work efficiency, operation, and low operating cost. It is suitable for single-piece and batch processing of small and medium-sized parts with a length of not more than 650mm. It is the first choice for the machining industry to configure planing machine tools.

Model		BC6050
Maximum cutting length(mm)		500
Max.range of the horizontal movement of the table		525
Max.distance between the ram bottom and table		370
Max.length of the vertical movement of table		270
Dimensions of table top(L×W)		440×360
Max.stroke length of the toolhead		120
Max.swivel angle of the toolhead		±60°
Max.section of tool(W×T)(mm)		20×30
Number of ram reciprocation per minute		14-80
Range of table feed	horizontal	0.2-0.25 0.08-1.00
	Vertical
Width of the T-slot for center positioning(mm)		18
Power of the main motor		3
N.W/G.W(kg)		1650
Overall dimensions(L×W×H)(mm)		2160×1070×1194

1. The working table of the bullhead planer has a horizontal and up-and-down moving mechanism; it is used to plan the inclined plane, thereby expanding the scope of use. 2. The feed system of the planer adopts a cam mechanism with 10 levels of feed. It is also very convenient to change the amount of knife. 3. The bullhead planer is equipped with an overload safety mechanism in the cutting system. When the cutting is overloaded due to careless operation or external force, the cutting tool will slip by itself, and the normal operation of the machine tool is guaranteed without damage to the parts. 4. Between the ram and the bed guide, as well as the gear pair with speed and the main sliding guide surface, there are lubricating oil pumped out by the oil pump for circulating lubrication. 5. The bull's head planer is equipped with a clutch and a brake parking mechanism, so when changing speed, starting the machine tool and stopping, it is not necessary to cut off the power. The brake parking mechanism can make the inertia stroke of the ram when the clutch is disengaged not more than 10 mm.1. When the beam is raised and lowered, the locking screw must be loosened first, and the screw must be tightened when working. 2. It is not allowed to adjust the ram stroke during the operation of the machine tool. When adjusting the stroke of the ram, it is not allowed to use the tapping method to loosen or tighten the adjusting handle. 3. The stroke of the ram shall not exceed the specified range. High speed is not allowed when using a long stroke. 4. When the worktable is powered or shaken by hand, pay attention to the limit of the screw stroke to prevent the screw and nut from disengaging or damage to the machine tool. 5. When loading and unloading the vise, handle it gently to avoid hurting the workbench. 6. After work, stop the workbench on the middle position of the beam.

BC6050 high quality metal shaping machine

Products Details

Featured Products

Contact us