Model		CA6241
Specifications
Max.Swing over bed		410mm
Max.Swing over carriage		225mm
Max.Swing in gap		630mm -
Effective gap length		210mm -
Max length of bed		750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm
Width of bed		400mm
Section of turming tool		25×25mm
	Spindle speeds	10-1400rpm/16-1400rpm(24 steps)
	Hole through spindle	52mm
Spindle	Spindle taper	NO.6(MT6)(φ90 1:20) [φ113 1:20]
	Number of feeds	(kinds)(for each)
Feed	Range of metric threads(kinds)	(1-192mm)44（44 kinds）
	Range of inch threads(kinds)	(2-24tpi)21（21 kinds）
	Range of module threads(kinds)	0.25-48(39)（Module 39kinds）
	Range of pitch threads(kinds)	1-96DP(37)(37kinds）
	Max.tail stock spindle travel	150mm
Taistock	Tail stock spindle diameter	75mm
	Taper of tail stock spindle center hole	NO.5(MT5)
Main motor		7.5KW(10HP_
	Overall dimensions for 750mm	2550*1140*1750
Packing dimensins    (L*W*H)	Overall dimensions for 1000mm	2700*1140*1750
	Overall dimensions for 1500mm	3200*1140*1750
	Length
Weiight(kg)		G.W  N.W.
	Weight for 750mm	2100  1990
	Weight for 1000mm	2190 2070
	Weight for 1500mm	2350 2220

* This series lathe machine is suitable for internal and external turning, tapering, and other rotating faces, metric, module and inch threads, as well as drilling and pull oil slot. * Width of bed is wider than normal lathe machine, with high hardness on guideway, the guideway is through high-frequency quenching, wear-resisting. * This machine is easy to operate, with rapid device for carriage, design with single hand wheel to operate. * The strength and rigidity of machine is higher than normal lathe machine, high efficiency, suit for heavy duty machining.1. 3-jaw chuck. 2. Cooling system. 3. Work Lamp. 4. Steady Rest.* Digital readout display * Grinding equipment * Face plate * Tool post production * Thread chasing dial * Loading screw guard * 4-jaw chuckFull digital DC variabie speed device made in abroad has been selected, it has charcters of big power, steady and reliable, the spindle box is passed through sliding gear, step 3 infinite variable may be realized, it has excellent torque and power performance. Built-in living center has been used by the tailstock, heavily loading, it has functions of manual and powered rapid traverse, easy for operating.1. CA series of ordinary horizontal lathe is suitable for turning inside and outside cylindrical surface, conical surface and other rotating surface, turning various metric and inch, modulus and pitch thread, and can carry out the work of drilling and pulling oil groove, is a very versatile horizontal lathe, widely used in all kinds of shaft and disc parts of the batch processing. 2. This series of lathe bed width in general lathe, rail width 400mm has a high stiffness; guide rail surface is quenched by medium frequency, and is durable. 3. The machine operation is flexible and concentrated, the apron with fast moving mechanism. Using single handle vivid of the operation, pleasant and good. 4. Machine tool structure rigidity and transmission rigidity are higher than the general lathe, the power utilization ratio is high, is suitable for the strong cutting. 5. Machine tool factory in strict accordance with the test procedures for testing, and make a strong cutting test, to ensure that the machine has a good accuracy and reliability.